top of page

Color Chart

INTERIOR CONCRETE DYE

EAGLE INTERIOR CONCRETE DYE transforms plain concrete into an elegant, decorative surface without the intensive labor and harsh chemicals of acid-based stains. INTERIOR CONCRETE DYE is a penetrating dye that quickly adds semi-translucent color to beautifully enhance the appearance of indoor concrete surfaces. These semi-transparent, “Nano-particles”, allow variations in the substrate to show through, enhancing the final look while creating a durable treatment that will not wear away with traffic.

 

Available in 17 stylish, earth-tone colors (see Product Brochure for color chart), INTERIOR CONCRETE DYE can be applied uniformly or mottled to give the appearance of an acid-stained surface. Colors may be applied singly, blended prior to application, or applied one over the other for endless decorative options. Simply dilute INTERIOR CONCRETE DYE with water, mix well, and spray on a properly prepared concrete surface. With its rapid dry time, INTERIOR CONCRETE DYE can usually be sealed the same day it is applied, saving time and minimizing inconvenient down time!  

 

EAGLE INTERIOR CONCRETE DYE must be sealed to protect the color from long term wear. Mix with water ONLY.

 

NET COVERAGE RATE: 200 sq. ft. – 400 sq. ft.

1 Pint (16 oz.) concentrate mixed with water makes 1-gallon of dye and covers approximately 200-400 square feet per gallon, depending on porosity and depth of color desired.

TECHNICAL & SAFETY INFORMATION

NOTEDue to shipping or VOC regulations, EAGLE INTERIOR CONCRETE DYE is limited to listed states: AL, AR, AZ, CA, CO, CT, DC, DE, FL, GA, ID, IL, IA, KS, KY, LA, MA, MD, ME, MI, MN, MS, MO, MT, NE, NH, NJ, NM, NC, NY, ND, NV, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VA, VT, WA, WV, WI, WY

For more info on VOC regulations in your area click here

PRODUCT GALLERY

bottom of page